Atalaya Mining reported record quarterly EBITDA of €78 million and a net cash position of nearly €319 million for the second quarter, while reducing its 2026 capital-spending plans by about €20 million due to project delays at San Dionisio. The company produced 13,500 tonnes of copper at all-in sustaining costs of $2.79 per pound, generating €58 million in free cash flow, and declared an interim dividend of €0.055 per share, roughly 25% higher than the prior year. Full-year production and cost guidance was maintained, though output is expected to finish toward the lower end of the target range. Growth projects including Masa Valverde, a polymetallic processing circuit at Riotinto, and the Touro project could eventually lift production to about 100,000 tonnes of copper equivalent, with Touro still awaiting environmental approval.
Nittetsu Mining Restores Access at Arqueros Copper Mine, Targets Production This Fiscal Year
Nittetsu Mining has restored access at its Arqueros Copper Mine project, where plant construction continues, with management targeting production within the current fiscal year. The update comes after a choppy stretch for the stock, which has retreated 16.01% over the past month while still posting a 27.02% 90 day share price return and a 37.61% year to date share price return. The shares now trade on a P/E of 15.2x based on the last close of ¥3,070, above the JP Metals and Mining industry average P/E of 11.3x and a peer average of 14.3x, a premium the company's 91.5% earnings growth over the past year and improved net profit margin of 7%, up from 4.1%, may help justify. A discounted cash flow estimate of ¥956.03 per share, however, frames the stock as overvalued on that measure, and the company's Return on Equity of 10.5% is described as low. The narrative could break if Arqueros faces fresh project delays or if earnings soften.
Jiangxi Copper Signs New Three-Year JCC Group Supply Deal
Jiangxi Copper has signed a new three-year supply and services agreement with JCC Group covering copper products, other metals, auxiliary materials and a wide range of industrial support services. The agreement adds another operational reference point for investors watching how sentiment shifts around future cash flows and risk, with the stock trading at HK$33.22 after a 30 day share price return down 15.43% and a year to date share price return down 23.95%, even though the 3 year total shareholder return is up about 3.3x. On valuation, Jiangxi Copper trades on a P/E of 8.4x, below the Hong Kong Metals and Mining industry average P/E of 10.1x and a peer average of 10.9x, and below an estimated fair P/E of 9.1x, with profit growth of 54.1% over the past year and 10.9% per year across five years. A Simply Wall St discounted cash flow model compares the HK$33.22 share price with an estimated future cash flow value of HK$62.35, framing the stock as materially undervalued. Risks remain if copper or gold demand weakens, or if project and service costs rise faster than the company can pass them on.
600362.CG · Demand · Positive Jiangxi Copper signed a new three-year supply and services agreement with JCC Group covering copper products and other metals, adding an operational reference point for future cash flows.
Jiangxi Copper Group (JCC Group) · Demand · Positive JCC Group is the counterparty to the new three-year supply and services agreement for copper products, other metals and industrial support services.
Cyprium Metals Hits Nifty Copper Leaching Milestones Ahead of First Cathode
Cyprium Metals has achieved key commissioning milestones at its Nifty Copper Complex in Western Australia as it advances heap leach operations and prepares for first copper cathode production. Executive chairman Matt Fifield said commissioning is progressing across the heap leach operation while pre-commissioning work on the solvent extraction and electrowinning plant nears completion, with targeted injection flow rates reached through direct injection leaching after more than a year of trials. Early results showed copper recovery responding quickly to acid injection, with copper-to-acid ratios performing better than initially anticipated, and grade control drilling reconciled within approximately 5% of the existing mineral resource block model. The company has established 212 production and monitoring wells, providing access to approximately 1.7 million tonnes of material and supporting an estimated six to eight months of planned production under conservative recovery assumptions. Remaining milestones before wet commissioning include installation of programmable logic controller controls and energisation of the SXEW plant, following the introduction of high-voltage power to the plant infrastructure.
COMEX copper closes down 1.22% as Fed signals pre-year-end rate hike
Copper futures on the New York market closed lower on Thursday, October 8, with the COMEX December contract falling 8.10 cents, or 1.22%, to settle at 6.5685 dollars per pound. Analysts said the Federal Reserve's tight monetary policy stance, along with the prospect of a December rate increase, is weighing on investor confidence in base metals, after the market digested the latest Fed meeting minutes, which signaled support for another rate hike before the end of the year because inflation remains above target. Copper trading is also being influenced by the direction of copper demand in China, the country that consumes large volumes of the metal. Although real end-use demand from China had begun to show signs of recovery earlier, that support is starting to fade amid broader economic pressures.
DPM Metals Hits High End of 2026 Guidance as Vareš Beats Plan
DPM Metals Inc. reported third-quarter 2026 production of 97,000 gold-equivalent ounces and said it was on track for the high end of its full-year production guidance, with the Vareš mine ramp-up running ahead of plan and expected to exceed its 2026 output target. The company also decided to begin developing twin declines into the Wedge Zone at Chelopech by year-end, a move it says points to additional near-term production potential and a longer mine life. The company's narrative projects $1.4 billion in revenue and $837.1 million in earnings by 2029, yielding a CA$67.78 fair value, a 25% upside to its current price. The most pessimistic analysts expected revenue to fall to about US$1.0 billion and earnings to about US$572.7 million. Investors are still watching how higher costs or permitting delays could affect the outlook.
DPM Metals Inc. · Supply · Positive Q3 production of 97,000 gold-equivalent ounces and Vareš beating plan put DPM on track for the high end of 2026 guidance.
GOLD · Supply · Positive DPM's Vareš mine ramp-up ahead of plan and Wedge Zone development point to stronger gold output, a positive supply-side signal for gold.
Getty Copper Inc. has closed its previously announced brokered and concurrent non-brokered private placement of flow-through common shares, raising aggregate gross proceeds of C$15,023,478.78. Under the brokered offering, the company issued 7,352,566 BC Charity FT Shares at C$1.395 each and 2,117,434 Charity FT Shares at C$1.305 each, for aggregate gross proceeds of C$13,020,080.94, through Velocity Capital Partners and Clarus Securities Inc. as co-lead agents and joint bookrunners alongside Raymond James Ltd. The non-brokered offering added 1,854,998 FT Shares at C$1.080 each for gross proceeds of C$2,003,397.84, with no commission payable. The company paid the agents a 6% cash commission on the brokered offering and issued 568,200 compensation warrants at C$0.97 per share for 16 months, and separately paid Velocity Capital Partners and Clarus Securities Inc. a flat advisory fee of C$105,000 plus 110,000 advisory warrants at C$0.97 for 16 months. Insiders subscribed for 483,000 FT Shares in the non-brokered offering for proceeds of C$521,640, a related party transaction under MI 61-101. Proceeds will fund eligible Canadian exploration expenses qualifying as flow-through critical mineral mining expenditures on the company's British Columbia projects on or before December 31, 2027, with renunciation to subscribers effective no later than December 31, 2026; the offering remains subject to final acceptance of the TSX Venture Exchange.